Residential HVAC maintenance, Tampa, Clearwater, St. Petersburg, Holiday, Palm Harbor, Spring Hill and New Port Richey

Residential Maintenance

At Tom Moore Heating & Cooling Inc. we can put in place a Preventative Maintenance program to keep your system in perfect working order. We perform residential preventative maintenance to Tampa, Clearwater, Palm Harbor, St. Petersburg, Spring Hill, Holiday and New Port Richey. It is vital that maintenance be performed in proper intervals to prevent unnecessary wear on your heating or air conditioning systems. Our maintenance programs are tailored to your needs, and will save you time, and money as well as increasing the life of your equipment, and reducing operating costs.

What you should expect from a preventative maintenance visit according to the ACCA:

Check system functions, safety controls, and adjust the operating sequence where appropriate.
Inspect electrical components and connections and repair/replace or tighten as required.
Ensure proper airflow and change dirty air filters.
Inspect pumps, lubricate, and check flow rates where appropriate.
Clean and lubricate motors as required.
Examine belts, adjust and align as required.
Inspect, clean and balance blowers as required.

Tom Moore Heating and Cooling Inc. offers spring and fall preventative maintenance to our residential customers.

Spring Visit (preparation for summer season):

Clean inside coil, condensate pans, condensate traps, and condensate lines to prevent obstructions.
Clean outside coil and straighten fins for efficient operation.
Check refrigerant levels and if low, find the leak. (According to many equipment manufacturers, a 10% refrigerant loss will result in a 20% decrease in system efficiency!)

Fall Visit (preparation for winter season):

Clean the burner assembly.
Remove soot from fireside of burner.
Clean and check operation of humidifier.
Visually or with remote camera, inspect heat exchanger for cracks.
Adjust air/fuel ratio of burner and perform combustion analysis. (Instrumentation used for combustion analysis is a means of fine-tuning a burner to achieve maximum fuel efficiency and “optimum firing.”)